Keywords:
Bidding extended on Open items for 2 minutes since last bid.
Category: ALL (472 records) CSW Contractors Inc *SALE DAY 2 of 2 - Bidding starts Wednesday, June 20, 2018 Ends Thursday, June 28, 2018, beginning @ 10:00 AM (PDT)
Previous page Next page

Item Photo Description Bids High
Bidder
Current
Amount
Next Bid
Required
Your
Bid
Your
Maximum
0 tn_computer.jpg***THIS AUCTION WILL CLOSE AT A RATE OF 2-LOTS PER MINUTE***

Day 1 (6/27): Equipment at Chandler, AZ Yard, Surprise, AZ

Day 2 (6/28): Equipment in Andrews, TX - Ramsey, MN, Carlsbad, NM

**2 DAY Preview at all locations June 25-26, 9 am - 4 pm daily, or by appointment, Payment made payable to Rosen Systems, Inc. in certified funds, Monday, July 2nd by 4 pm

Locations in AZ, TX, MN

10% Buyer's Premium Will Apply

REMOVAL SALE DAY 1 - Chandler, AZ: July 2-6 & 9-11 from 8 am until 4 pm.

REMOVAL SALE DAY 1 - Surprise, AZ: By appointment only, complete removal by July 13th

REMOVAL SALE DAY 2 - Andrews, TX: By appointment only, complete removal by July 6th

REMOVAL SALE DAY 2 - Carlsbad, NM: By appointment only, complete removal by July 6th

REMOVAL SALE DAY 2 - Ramsey, MN: July 2-3, 6th and 9-11 (closed July 4-5)

PAYMENT made payable to Rosen Systems, Inc. in certified funds, Monday, July 2nd by 4 pm

        ended
903
tn_csw0903.JPGSCRAPER, CO #123, CATERPILLAR, MODEL NO. 651B, FRONT S/N 67K789, BOWL, S/N 45M640, MFG 1977, HOURS UNKNOWN, STARTS, RUNS, OPERATES, BRAKES NEED REPAIR, HAS FLAT TIRE **(Located at 2211 US Highway 385 South, Andrews, TX 79714) INSPECTED OUTSIDE OF MACHINE. NO VISIBLE LEAKS. FOUND THAT AIR DRYER HAD BEEN BYPASSED. CHECKED FLUID LEVELS AND THEY WERE ALL OK. TURNED ON MASTER SWITCH AND TRIED STARTING MACHINE. HAD TO PRIME FUEL SYSTEM AND USE A SHOT OF ETHER TO START MACHINE. MACHINE STARTED AND LET WARM UP. CHECKED OPERATION OF BOWL, APRON AND EJECTOR AND THEY WORKED. CHECKED STEERING AND IT WAS WORKING. NOTICED THAT AIR PRESSURE WAS TAKING FOR EVER TO BUILD UP. TRIED RELEASING BRAKES AND WHAT AIR PRESSURE WAS THERE WENT AWAY IMMEDIATELY. TRIED MOVING MACHINE AND MACHINE MOVED FORWARD AND REVERTS IN FIRST GEAR BUT MACHINE HAS NO BRAKES. AIR SYSTEM NEEDS TO BE CHECKED AND BRAKES NEED ADJUSTED OR REPLACED. MACHINE WAS AN OPEN CAB. NO A/C OR HEATER.

Condition Analysis by Warren CAT invoice dated 4/26/2018 PDF Download


Click for operational Video
(LOT REMOVED BY APPOINTMENT ONLY, completed by July 6th)

21 14892 7,100.00   ended
904
		tn_csw0904.JPGSCRAPER, CO #126, CATERPILLAR, MODEL NO. 651B, S/N 67K817, MFG 1978, HOURS UNKNOWN, STARTS, RUNS, OPERATES, NEEDS BRAKE REPAIR, **(Located at 2211 US Highway 385 South, Andrews, TX 79714) CHECKED OUTSIDE OF MACHINE AND FOUND NO VISIBLE LEAKS. CHECKED FLUID LEVELS AND THEY WERE GOOD. TURNED ON MASTER KEY AND STARTED MACHINE. LET MACHINE WARM UP. CHECKED OPERATION OF BOWL, APRON AND EJECTOR AND THEY WERE WORKING. CHECKED STEERING AND IT WAS WORKING. BRAKE AIR PRESSURE TOOK AWHILE TO BUILD UP AND ONLY GOT TO 90 PSI. RELEASED PARK BRAKE AND AIR PRESSURE WENT TO 30 PSI. TRIED MOVING MACHINE AND IT WOULD MOVE FORWARD AND REVERSE IN FIRST GEAR. MACHINE DOESN'T HAVE AMPLE AIR PRESSURE TO APPLY BRAKES. AIR SYSTEM NEEDS CHECKED AND BRAKES ETHER NEED ADJUSTED OR REPLACED. MACHINE HAS OPEN CAB, NO A/C OR HEATER.

Condition Analysis by Warren CAT invoice dated 4/26/2018 PDF Download


Click for operational Video
(LOT REMOVED BY APPOINTMENT ONLY, completed by July 6th)

21 14892 7,100.00   ended
905
tn_csw0905.JPGSCRAPER, CO #132 CATERPILLAR, MODEL NO. 651B, S/N 67K876, MFG 1978, HOURS UNKNOWN, WOULD NOT START, ENGINE TURNS OVER GOOD, HAS FUEL DELIVERY PROBLEM, ENGINE APPEARS NEW OR REBUILT, ENGINE HOUR METER SHOWS 4 HOURS, NEEDS HYDRAULIC OIL, **(Located at 2211 US Highway 385 South, Andrews, TX 79714) INSPECTED OUTSIDE OF MACHINE. FOUND NO VISIBLE LEAKS. CHECKED OIL LEVELS AND FOUND HYDRAULIC OIL WAS LOW. SAW THAT ENGINE LOOKS TO BE RECENTLY INSTALLED. TURNED ON MASTER SWITCH AND TRIED STARTING MACHINE. MACHINE CRANKS BUT WILL NOT START. TRIED PRIMING FUEL SYSTEM AND TRIED STARTING. NOTICED THAT NO SMOKE WAS COMING OUT. NOTICED BOTH FUEL LINES FROM TANK HAD BEEN REPLACED. REMOVED FUEL SUPPLY LINE TO PRIMARY FILTER AND NOTICED NO FUEL. LOOKED AT PARTS BREAK DOWN AND FOUND FUEL LINES WERE CROSSED. PRIMED FUEL SYSTEM AND STILL NO START. MIGHT HAVE STUCK NOZZLES.

Condition Analysis by Warren CAT invoice dated 4/26/2018 PDF Download (LOT REMOVED BY APPOINTMENT ONLY, completed by July 6th)

21 14892 7,100.00   ended
906
tn_csw0906.JPGSCRAPER, CO #133, CATERPILLAR, MODEL NO. 651B, S/N 67K00877, MFG 1978, HOUR METER SHOWS 4114 HOURS, STARTS, RUNS, OPERATES, NEEDS BRAKE REPAIR, **(Located at 2211 US Highway 385 South, Andrews, TX 79714) INSPECTED OUTSIDE OF MACHINE. NO VISIBLE LEAKS. CHECKED FLUID LEVELS AND THEY WERE GOOD. TURNED ON MASTER SWITCH. STARTED MACHINE AND LET WARM UP. CHECKED OPERATION OF BOWL APRON AND EJECTOR AND THEY WERE WORKING. CHECKED STEERING AND IT WAS WORKING AT THIS TIME. AIR PRESSURE WOULD NOT BUILD UP. TRIED MOVING MACHINE AND MACHINE WOULD MOVE IN FORWARD AND REVERSE IN FIRST GEAR. MACHINE HAS NO BRAKES. AIR SYSTEM NEEDS TO BE CHECKED AND BRAKES NEED INSPECTED AND OR REPLACED. MACHINE HAS OPEN CAB. NO A/C OR HEATER

Condition Analysis by Warren CAT invoice dated 4/26/2018 PDF Download


Click for operational Video
(LOT REMOVED BY APPOINTMENT ONLY, completed by July 6th)

19 14892 7,100.00   ended
907
tn_csw0907.JPGSCRAPER, CO #127, CATERPILLAR, MODEL NO. 651B, S/N 67K709, MFG 1975, HOUR METER SHOWS 3443 HOURS, STARTS, RUNS, OPERATES, NEEDS BRAKE REPAIR, **(Located at 2211 US Highway 385 South, Andrews, TX 79714) CHECKED OUTSIDE OF MACHINE. NO VISIBLE LEAKS. CHECKED FLUID LEVELS AND THEY WERE OK. TURNED ON MASTER SWITCH. STARTED MACHINE AND LET WARM UP. OPERATED BOWL, APRON AND EJECTOR. CHECKED STEERING AND ALL HYDRAULICS SEEM TO BE WORKING. AIR PRESSURE WOULD NOT BUILD UP. TRIED MOVING MACHINE AND MACHINE WILL MOVE FORWARD AND REVERSE IN FIRST GEAR. MACHINE HAD NO BRAKES DUE TO NO AIR PRESSURE. AIR SYSTEM NEED TO BE CHECKED AND BRAKES NEED ADJUSTED OR REPLACED.

Condition Analysis by Warren CAT invoice dated 4/26/2018 PDF Download


Click for operational Video
(LOT REMOVED BY APPOINTMENT ONLY, completed by July 6th)

19 14892 7,100.00   ended
908
tn_csw0908.JPGWATER WAGON, CO #453, CATERPILLAR, MODEL NO. 621F, PIN 4SK00734, MFG 1998, HOUR METER SHOWS 832 HOURS, STARTS, RUNS, OPERATES, **(Located at 2211 US Highway 385 South, Andrews, TX 79714) INSPECTED OUTSIDE OF MACHINE. NO VISIBLE LEAKS. CHECKED FLUID LEVELS AND EVERYTHING LOOKED GOOD. STARTED MACHINE AND LET WARM UP. COULDN'T CHECK OPERATION OF WATER SPRAY SYSTEM DUE TO NO WATER AVAILABLE. WATER PUMP DOES ENGAGE. AIR PRESSURE WOULD BUILD AIR. THROTTLE IS LEAKING AIR. RELEASED PARKING BRAKE BUT BRAKE LIGHT WAS STILL ON. TRIED MOVING MACHINE AND IT WOULD MOVE IN FORWARD AND REVERSE IN FIRST GEAR. PARKING BRAKE DRAGGING. THROTTLE VALVE NEEDS REPLACED DUE TO AIR LEAK. PARKING BRAKE NEEDS INSPECTED TO FIND OUT WHY ITS NOT RELEASING COMPLETELY.

Condition Analysis by Warren CAT invoice dated 4/26/2018 PDF Download


Click for operational Video
(LOT REMOVED BY APPOINTMENT ONLY, completed by July 6th)

42 14892 31,500.00   ended
909
tn_csw0909.JPGCRAWLER DOZER, CO #43, CATERPILLAR MODEL NO. D9L PUSH DOZER, S/N 14Y4038, MFG 1986,, HOUR METER SHOWS 16,798 HOURS, STARTS, RUNS OPERATES, **(Located at 2211 US Highway 385 South, Andrews, TX 79714) SEALS LEAKING. RIGHT LIFT CYLINDER LIP SEAL LEAKING. NOTICED SPROCKET SEGMENT ARE WORN TO A POINT, RAIL BUSHINGS WORN, TRACK PADS WORN AND IDLERS AND ROLLERS WORN. UNDERCARRIAGE ISIN NEED OF RECONDITIONING. CHECKED FLUID LEVELS. TURNED ON MASTER SWITCH AND STARTED MACHINE. LET MACHINE WARM UP. OPERATED BLADE AND IT WORKS GOOD. MOVED MACHINE AND MACHINE WOULD MOVE FORWARD AND REVERSE IN BOTH FIRST AND SECOND. BRAKES WORK AND STARING WORKS. MACHINE HAS OPEN CAB SO NO A/C OR HEATER.

Condition Analysis by Warren CAT invoice dated 4/26/2018 PDF Download


Click for operational Video
(LOT REMOVED BY APPOINTMENT ONLY, completed by July 6th)

24 14892 18,250.00   ended
910 tn_csw910.jpgCRAWLER DOZER, CO #41, CATERPILLAR MODEL NO. D9L, S/N 14Y02920, MFG 1985, HOUR METER SHOWS 17,888 HOURS, STARTS, RUNS OPERATES, **(Located at 2211 US Highway 385 South, Andrews, TX 79714) CHECKED OUTSIDE OF MACHINE. FOUND BOTH RECOIL SEALS LEAKING. RIGHT REAR RIPPER TILT CYLINDER LIP SEAL LEAKING. BOTH BLADE LIFT CYLINDERS LIP SEALS LEAKING. BLADE TILT CYLINDER LIP SEAL LEAKING. SPROCKET SEGMENTS WORN TO A POINT, RAIL BUSHINGS WORN, TRACK PADS WORN AND ROLLERS AND IDLERS WORN. UNDERCARRIAGE NEED RECONDITIONING. CHECKED FLUID LEVELS. TURNED ON MASTER KEY AND STARTED. LET MACHINE WARM UP. CHECKED OPERATION OF BLADE AND RIPPER AND THEY WORK GOOD. MOVED MACHINE FORWARD AND REVERSE. MACHINE WOULD MOVE IN BOTH FIRST AND SECOND. CHECKED STEERING OF MACHINE AND NOTICED THAT WHEN MACHINE WAS STEERED RIGHT THAT THE RIGHT BRAKES WERE SLIPPING A LITTLE. CHECKED OPERATION OF A/C AND IT WAS NOT WORKING.

Condition Analysis by Warren CAT invoice dated 4/26/2018 PDF Download


Click for operational Video
(LOT REMOVED BY APPOINTMENT ONLY, completed by July 6th)

24 14892 31,000.00   ended
911
tn_csw0911.JPGSCRAPER, CO #134, CATERPILLAR MODEL NO. 651B, S/N 67K878, MFG 1978, HOUR METER SHOWS 617 HOURS, BLOWN ENGINE, DOES NOT RUN, LOADED WITH CLAY IN BOWL, **(Located at WCS Landfill, 9998 W Hwy 176, Andrews, TX 79714) (LOT REMOVED BY APPOINTMENT ONLY, completed by July 6th) 10 14931 1,050.00   ended
912
tn_csw0912.JPGFUEL SERVICE TRUCK, CO #416, 2006 PETERBILT, VIN #1NP5LU0X76D654277, MCCLELLAN TANK, S/N 056201, TANDEM AXLE, CATERPILLAR DIESEL, EATON/FULLER 8-SPEED MANUAL TRANSMISSION, NEEDS JUMP TO STARTS, **(Located at 2211 US Highway 385 South, Andrews, TX 79714) (LOT REMOVED BY APPOINTMENT ONLY, completed by July 6th) ** Titles will be mailed within 14 business days (excludes weekends and holidays) from receipt of the paperwork from the auction site via USPS, certified mail to the address shown on the invoice, unless otherwise specified on the invoice at the time of payment. Bidder is responsible for registration and all applicable taxes due to the Department of Motor Vehicles. Buyer is responsible for all toll charges incurred after auction date. A $30.00 title preparation fee will be added to this lot. 30 14918 41,000.00   ended
913A
tn_csw0913a.jpgPIPE FUSION MACHINE, MCELROY TRACSTAR SERIES II 500, MODEL TS00106, 23 HP, DIESEL, S/N 028236, MOUNTED ON APPROCIMATLY 16' EQUIPMENT TRAILER WITH DOVETAIL BED, (2) TOOL BOXES AND HONDA EB 10000 PORTABLE GENERATOR (209 HOURS), **(Located at 2211 US Highway 385 South, Andrews, TX 79714) 38 14809 31,000.00   ended
913
tn_csw0913.JPGELEVATED WATER TANK/TRAILER, CO #831, MFG 2001, VIN #97806, SINGLE AXLE ON STANDS, MEGA TOWER WITH MOTOR AND HYDRAULICS, **(Located at 2211 US Highway 385 South, Andrews, TX 79714) (LOT REMOVED BY APPOINTMENT ONLY, completed by July 6th) ** Titles will be mailed within 14 business days (excludes weekends and holidays) from receipt of the paperwork from the auction site via USPS, certified mail to the address shown on the invoice, unless otherwise specified on the invoice at the time of payment. Bidder is responsible for registration and all applicable taxes due to the Department of Motor Vehicles. Buyer is responsible for all toll charges incurred after auction date. A $30.00 title preparation fee will be added to this lot. 23 14809 14,000.00   ended
914
tn_csw0914.JPGTRENCHER, CO #1124, VERMEER, MODEL NO. T755 III, 2012, S/N 1VR2160RK1C1000529, STARTS, RUNS, OPERATES, HOUR METER SHOWS 2,353 HOURS, **(Located at 2211 US Highway 385 South, Andrews, TX 79714) (LOT REMOVED BY APPOINTMENT ONLY, completed by July 6th) 42 14832 160,000.00   ended
915
tn_csw0915.JPGMOTOR GRADER, CO #72, CATERPILLAR, MODEL NO. 14G, CAB LOCKS, NO KEY, LAST RAN IN 2009, HAS BEEN IN SALT WATER, DOES NOT RUN, MANY ISSUES, S/N 96U06642, MFG 1985, **(Located at 2415 Pecos Hwy, Carlsbad, NM) (LOT REMOVED BY APPOINTMENT ONLY, completed by July 6th) 55 15023 29,500.00   ended
916
tn_csw0916.JPGWHEEL DOZER, CO #59, CATERPILLAR, MODEL NO. 834B, PIN-9ZZ00435, MFG 1998, NEW BATTERIES, (Located at 2211 US Highway 385 South, Andrews, TX 79714) (LOT REMOVED BY APPOINTMENT ONLY, completed by July 6th) 14 14931 7,125.00   ended
917
tn_csw0917.JPGLOT #917, #918 & #919, SOLD AS ONE LOT: LOT #917 - HYDRAULIC RAMS AND ARMS FOR D9 DOZER BLADE, LOT #918 - DOZER BLADE FOR D9, 16' WITH PARTS, AS SHOWN, #919 - DOZER BLADE, 15' WITH PARTS, AS SHOWN **(Located at 2415 Pecos Hwy, Carlsbad, NM) (LOT REMOVED BY APPOINTMENT ONLY, completed by July 6th) 3 14892 525.00   ended
1001
tn_1001.JPGBIG TEX MODEL NO. 22GN-40BK851R GOOSENECK FLAT BED TRAILER, GAWR: FRONT 10,000 LB REAR 10,000 LB,L 40' BED, RAMPS, VIN #16VGX4028G6043709, MFG 2015, CONTENTS NOT INCLUDED, ***(Located at 9411 Alpine Drive, Ramsey, MN 55303) ** Titles will be mailed within 14 business days (excludes weekends and holidays) from receipt of the paperwork from the auction site via USPS, certified mail to the address shown on the invoice, unless otherwise specified on the invoice at the time of payment. Bidder is responsible for registration and all applicable taxes due to the Department of Motor Vehicles. Buyer is responsible for all toll charges incurred after auction date. A $30.00 title preparation fee will be added to this lot. 16 2397 3,650.00   ended
1002
tn_1002.JPGHONDA EU2000i PORTABLE GENERATOR, ***(Located at 9411 Alpine Drive, Ramsey, MN 55303) 13 14910 390.00   ended
1003
tn_1003.JPGCOMFORT ZONE, 240 WH CEILING MOUNT HEATER, NEW, ***(Located at 9411 Alpine Drive, Ramsey, MN 55303) 8 14742 45.01   ended
1004
tn_1004.JPG(16) HUSKY 10" PIGTAIL LEVELS, ***(Located at 9411 Alpine Drive, Ramsey, MN 55303) 10 14742 30.01   ended
1005
tn_1005.JPG(2) 1/2" DRIVE TORQUE WRENCHES, (1) PROTO 6016C, (1) ROCK RIVER 30", ***(Located at 9411 Alpine Drive, Ramsey, MN 55303) 6 14878 27.00   ended
1006
tn_1006.JPGMILWAUKEE FUEL CAT NO. 2705-20, 18 VOLT, CORDLESS DRILL, WITH CHARGER, (2) BATTERIES AND CASE, ***(Located at 9411 Alpine Drive, Ramsey, MN 55303) 19 14980 112.00   ended
1007
tn_1007.JPGRIDGID MODEL NO. R32104, 7 1/2" CIRCULAR SAW, WITH EXTRA BLADES, ***(Located at 9411 Alpine Drive, Ramsey, MN 55303) 6 14916 23.00   ended
1008
tn_1008.JPG(7) ROCK RIVER, RR-3016-04, 4' LADDERS, 300 LB CAPACITY, ***(Located at 9411 Alpine Drive, Ramsey, MN 55303) 12 14983 100.00   ended
1009
tn_1009.JPG(3) PARTIAL STANDARD WRENCH SETS, (2) 1/4" - 1", (1) 3/8" - 1 1/4", ***(Located at 9411 Alpine Drive, Ramsey, MN 55303) 4 14916 6.00   ended
1010
tn_1010.JPGMILWAUKEE 1 9/16", SDS-MAX ROTARY HAMMER, CAT NO. 5317-20, 450/MN RPM WITH CASE, ***(Located at 9411 Alpine Drive, Ramsey, MN 55303) 14 14980 136.00   ended
1011
tn_1011.JPGCROSSTECH MFG MODEL NO. BURSHWOLF 7800HF, BRUSH CUTTER ATTACHMENT, S/N 01105, 1318 LBS, 4" MAX CUTTING DIAMETER, 78" CUT WIDTH 90" x 80" x 21" OVERALL, ***(Located at 9411 Alpine Drive, Ramsey, MN 55303) 8 14873 805.00   ended
1012 tn_1012.JPG(10) 8' TEARDROP TYPE CROSSMEMBERS, ***(Located at 9411 Alpine Drive, Ramsey, MN 55303) 14 14959 120.00   ended
1013
tn_1013.JPGYBICO BANDING CAST, WITH TENSIORES CRIMPER AND PARTIAL SPOOL OF 3/4" STEEL BANDING, ***(Located at 9411 Alpine Drive, Ramsey, MN 55303) 10 14983 145.00   ended
1014
tn_1014.JPGLOT OF STEEL GROUNDING RODS, WITH COATING, 1/2" AND 5/8" DIAMETER AND LENGTHS UP TO 10', ***(Located at 9411 Alpine Drive, Ramsey, MN 55303) 10 14998 61.00   ended
1015
tn_1015.JPGMILWAUKEE CAT NO. 2729-20 CORDLESS 18V DEEP CUT BANDSAW, INCLUDES CHARGER, CASE, AND (2) M18, 18V BATTERIES, ***(Located at 9411 Alpine Drive, Ramsey, MN 55303) 10 14962 111.00   ended
1016
tn_1016.JPG20' CONEX CONTAINER. TYPE SP-STDT-02(F), MFG IN 2017, S/N: 17SB206120. (NOTE: CURRENTLY ON A FLATBED TRAILER. BUYER RESPONSIBLE FOR REMOVAL), ***(Located at 9411 Alpine Drive, Ramsey, MN 55303) 9 14916 825.00   ended
1017
tn_1017.JPGMR HEATER, 50,000 BTU, KEROSENE HEATER, ***(Located at 9411 Alpine Drive, Ramsey, MN 55303) 8 15033 51.00   ended
1018
tn_1018.JPGEQUIPRITE 5500 LB PALLET JACK, ***(Located at 9411 Alpine Drive, Ramsey, MN 55303) 8 15016 70.00   ended
1019
tn_1019.JPGDELTA PORTABLE LIQUID TRANSFER TANK WITH FILL-RITE METER AND EXPLOSION PROOF PUMP MOTOR. 60" X 33" X 43" OVERALL, ***(Located at 9411 Alpine Drive, Ramsey, MN 55303) 9 14916 310.00   ended
1021
tn_1021.JPG(3) CRESCENT WRENCHES, 12", 18" AND 24", ***(Located at 9411 Alpine Drive, Ramsey, MN 55303) 6 14916 28.00   ended
1022
tn_1022.JPG(4) WOOD PLATFORM DOLLIES, PLATFORM MEASURES 36" x 24", ***(Located at 9411 Alpine Drive, Ramsey, MN 55303) 6 14962 35.00   ended
1023 tn_1023.JPG(7) 8' FIBERGLASS LADDERS, ***(Located at 9411 Alpine Drive, Ramsey, MN 55303) 10 14980 170.00   ended
1024
tn_1024.JPGPALLET OF ASSORTED SPRAY PAINTS, ADHESIVES, LUBRICANTS AND MORE, ***(Located at 9411 Alpine Drive, Ramsey, MN 55303) 5 14873 34.00   ended
1025
tn_1025.JPGHONDA ELL2000i GENERATOR, AC OUTPUT 120V, 13.3 AMPS, ***(Located at 9411 Alpine Drive, Ramsey, MN 55303) 9 14904 255.00   ended
1026
tn_1026.JPG12' CANTILEVER RACKING, ***(Located at 9411 Alpine Drive, Ramsey, MN 55303) 9 14999 130.00   ended
1027
tn_1027.JPG(2) MILWAUKEE FUEL, CAT NO. 2754-20, 18 VOLT, 3/8" IPACT GUNS WITH CHARGER, CASES, ***(Located at 9411 Alpine Drive, Ramsey, MN 55303) 14 14958 150.00   ended
1028
tn_1028.JPGMILWAUKEE CAT NO. 2472-20, 600 MCM CABLE CUTTER, M12, 12V BATTERY WITH CHARGER AND CASE, ***(Located at 9411 Alpine Drive, Ramsey, MN 55303) 10 14742 100.01   ended
1029 tn_1029.JPG(8) 6' FIBERGLASS LADDERS, ***(Located at 9411 Alpine Drive, Ramsey, MN 55303) 13 14983 180.00   ended
1030
tn_1030.JPGLARGE ASSORTMENT OF LEVELS AND FRAMING SQUARES, ***(Located at 9411 Alpine Drive, Ramsey, MN 55303) 8 14916 32.00   ended
1032
tn_1032.JPG(8) LEVELS, (4) HUSKY 24" DIGITAL, ***(Located at 9411 Alpine Drive, Ramsey, MN 55303) 3 14998 31.00   ended
1033
tn_1033.JPGFABRIQUE 10' CARGO TRAILER, GAWR:3500 LB, VIN #53BLTEA14GF017787, MFG 2015, ***(Located at 9411 Alpine Drive, Ramsey, MN 55303) ** Titles will be mailed within 14 business days (excludes weekends and holidays) from receipt of the paperwork from the auction site via USPS, certified mail to the address shown on the invoice, unless otherwise specified on the invoice at the time of payment. Bidder is responsible for registration and all applicable taxes due to the Department of Motor Vehicles. Buyer is responsible for all toll charges incurred after auction date. A $30.00 title preparation fee will be added to this lot. 15 14904 1,068.00   ended
1034
tn_1034.JPGLARGE GROUP OF WRENCHES, SIZES UP TO 1 1/8", ***(Located at 9411 Alpine Drive, Ramsey, MN 55303) 4 14916 11.00   ended
1035
tn_1035.JPGLARGE GROUP OF EXTENSION CORDS, ***(Located at 9411 Alpine Drive, Ramsey, MN 55303) 15 14880 85.00   ended

Bidder number Password Increments

Select page to view:
p1


rosensystems.com
Rosen Systems Home - Online Auctions - Contact Rosen
© Copyright, 2017 rosensystems.com